TZR250 3MA
Go to content

Had a lot off work with the fairing, looks like it had more cracks/holes then I hoped fore.
While repairing there was a point that I wish a good fairing set popped up on Ebay.
But as usual, nothing came.

So only one option left, repairing it all.
All repairs are done by soldering the crack at the frond (using a iron), roughen up the back and use polyester repair.
The frond is then smooth with polyester putty.

It went so far had to buy a top fairing from Ebay so could use parts from it.
Here you see I took a peace from the yellow fairing and mounted it on the original one.

Here it is all fitted to see if its all right.
(Where you see black, there it is repaired)

Although it is repaired with a completely different peace, both sides line up nicely.

Not good visible on this picture, but this side hade a lot off cracks at the lower part.
All repaired now

Someone drilled a hole here, don't know way

Also the V-peace is repaired and fits perfectly.

Next thing is clean the panel's, and drop them at the painter.

Back to content