TZR250 3MA
Go to content

Took me a wile, du to other projects but finally finished it.
Charging system and electric starter all is working correct now.

Because I'm running without airfilter, like to hold the carb as free as possible.
Therefore tightened all wires close to the frame.

As you can see, got a good clearance all around the carb.
Should be easy to work on

Tightened the wiring from the dash more, so it could move/vibrate freely

And the on/off swish is located next to the battery holder.
Nice and tight and a little bit out off site.

Need to do some small thinks, but think I can dyno here next week to see where we are.
Could be interesting to see

Back to content