TZR250 3MA

Ga naar de inhoud

Hoofdmenu

Experimental airjet solution

3MA (general)

This page describes two experimental airjet solutions

 
 

First is a between solution (if you don't want to do the full carb mod link)
Here you have the two airjet intake connections

Tap a M4 inside the brass tube (will go quit easy, as its soft material)

Ones done, you see its gives a nice finish

Mounted with a original airjet

 

Second, (easiest) is the use of a hose and a plug cap

Pressed plug cap inside the hose

Ready for mounting

Mounted on carb

 
Terug naar de inhoud | Terug naar het hoofdmenu